<address id="7rr7f"></address>

    <address id="7rr7f"><address id="7rr7f"><th id="7rr7f"></th></address></address>

        您的位置:開發工具

        開發工具

        ST-LINK/V2

         The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

        In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

        STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

        STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

        Key Features

        • 5 V power supplied by a USB connector
        • USB 2.0 full-speed-compatible interface
        • USB standard A to Mini- B cable
        • SWIM specific features
          • 1.65 V to 5.5 V application voltage supported on SWIM interface
          • SWIM low-speed and high-speed modes supported
          • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
          • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
          • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
        • JTAG/serial wire debugging (SWD) specific features:
          • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
          • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
          • JTAG supported
          • SWD and serial wire viewer (SWV) communication supported
        • Direct firmware update feature supported (DFU)
        • Status LED which blinks during communication with the PC
        • Operating temperature 0 to 50 °C
        • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

        IMAGE

        [返回]
        日产AV高清无码,日本成本人h动漫无码网址,nana在线观看高清视频,欧美综合自拍亚洲综合图区,精品国产91Av自在自线,好男人视频在线观看